In view of the use and existing problems of high water cut hydraulic fluid for hydraulic support in Shendong mining area, the water quality of each mine in Shendong mining area was analyzed. The influence of mine water quality on hydraulic fluid was analyzed, including the influence of water hardness, the influence of impurities in water, the influence of sulfate ions and chloride ions, the influence of pH value, the influence of conductivity, and the comparison of different raw liquids and different hydraulic fluids. The matters needing attention in daily use and maintenance of hydraulic fluids were put forward. The corresponding hydraulic fluid should be scientifically selected and reasonably proportioned according to the mine water quality. The real-time monitoring of the hydraulic fluid should be paid attention to. The changes in the water quality, concentration, pH value and microbial situation of the hydraulic fluid should be monitored daily. The maintenance and management of the problems should be carried out in time according to the situation, so as to prevent equipment corrosion and ensure the working stability of the hydraulic system. It can provide reference for the selection, proportioning and maintenance of the high water-cut hydraulic fluid of the mine hydraulic support and ensure the safe and efficient production of the working face.
Published in | International Journal of Oil, Gas and Coal Engineering (Volume 9, Issue 1) |
DOI | 10.11648/j.ogce.20210901.11 |
Page(s) | 1-5 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Hydraulic Support, Hydraulic Fluid, Water Quality, Hydraulic System
[1] | Wang Chao. Present situation and prospect of concentrated liquid of mining hydraulic support [J]. Inner Mongolia Coal Economy. 2015, (08). |
[2] | Wang Jin. Research status and development of hydraulic fluids for hydraulic supports [J]. Coal and chemical industry. 2014, 37 (10). |
[3] | Lu Liangliang. Hydraulic support hydraulic system failure problem analysis [J]. Science and technology economic guide. 2020, 28 (30). |
[4] | Han Tairan. Research and application of green new hydraulic support transmission medium [J]. Clean coal technology. 2019, 25 (S2). |
[5] | Jin Yang. Application of hydraulic support transmission medium with different systems in Pingmei Coal Mine Area [J]. Coal Mine Machinery. 2019, 40 (04). |
[6] | Ma Haoye. Research on fault diagnosis and maintenance technology of hydraulic system of hydraulic support [J]. Mechanical management development. 2020, 35 (09). |
[7] | Chen Minjie. Research on fault simulation and diagnosis technology of hydraulic support hydraulic system [J]. Hydraulic and pneumatic. 2021, (01). |
[8] | Ma Jiamin. Analysis and application of high water cut hydraulic fluid for hydraulic support [J]. Industrial technology. 2015 (26). |
[9] | Huang Liyun. Interpretation of the «Emulsion oil, concentrate and high water hydraulic fluid for hydraulic support» standard [J]. Petroleum business. 2016 (3). |
[10] | Zhou jiuhua. Selection and analysis of high water-cut hydraulic fluid for hydraulic support in Shendong mining area [J]. Shaanxi Coal. 2019 (1). |
[11] | Deng Gaopeng. Research and Application of Water Treatment Device in Fully Mechanized Mining Face [J]. Zhongzhou Coal. 2014 (12). |
[12] | Hou Jiantao. Development and Application of Efficient Green Multifunctional Additives [J]. Clean coal technology. 2016 (06). |
[13] | Huang Liyun. Development of emulsified oil for high resistance hard water hydraulic support [J]. Petroleum technology. 2020, 38 (03). |
[14] | Zhang Xuan. Use and maintenance of mineral hydraulic oil [J]. Technological innovation and application. 2013, (18). |
[15] | Shen Mingbin. Safety use and fault maintenance of hydraulic support [J]. Southern agricultural machinery. 2019, 50 (12). |
APA Style
Yifang Liu. (2021). Comparative Analysis of High Water Hydraulic Fluid for Hydraulic Support. International Journal of Oil, Gas and Coal Engineering, 9(1), 1-5. https://doi.org/10.11648/j.ogce.20210901.11
ACS Style
Yifang Liu. Comparative Analysis of High Water Hydraulic Fluid for Hydraulic Support. Int. J. Oil Gas Coal Eng. 2021, 9(1), 1-5. doi: 10.11648/j.ogce.20210901.11
AMA Style
Yifang Liu. Comparative Analysis of High Water Hydraulic Fluid for Hydraulic Support. Int J Oil Gas Coal Eng. 2021;9(1):1-5. doi: 10.11648/j.ogce.20210901.11
@article{10.11648/j.ogce.20210901.11, author = {Yifang Liu}, title = {Comparative Analysis of High Water Hydraulic Fluid for Hydraulic Support}, journal = {International Journal of Oil, Gas and Coal Engineering}, volume = {9}, number = {1}, pages = {1-5}, doi = {10.11648/j.ogce.20210901.11}, url = {https://doi.org/10.11648/j.ogce.20210901.11}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20210901.11}, abstract = {In view of the use and existing problems of high water cut hydraulic fluid for hydraulic support in Shendong mining area, the water quality of each mine in Shendong mining area was analyzed. The influence of mine water quality on hydraulic fluid was analyzed, including the influence of water hardness, the influence of impurities in water, the influence of sulfate ions and chloride ions, the influence of pH value, the influence of conductivity, and the comparison of different raw liquids and different hydraulic fluids. The matters needing attention in daily use and maintenance of hydraulic fluids were put forward. The corresponding hydraulic fluid should be scientifically selected and reasonably proportioned according to the mine water quality. The real-time monitoring of the hydraulic fluid should be paid attention to. The changes in the water quality, concentration, pH value and microbial situation of the hydraulic fluid should be monitored daily. The maintenance and management of the problems should be carried out in time according to the situation, so as to prevent equipment corrosion and ensure the working stability of the hydraulic system. It can provide reference for the selection, proportioning and maintenance of the high water-cut hydraulic fluid of the mine hydraulic support and ensure the safe and efficient production of the working face.}, year = {2021} }
TY - JOUR T1 - Comparative Analysis of High Water Hydraulic Fluid for Hydraulic Support AU - Yifang Liu Y1 - 2021/02/27 PY - 2021 N1 - https://doi.org/10.11648/j.ogce.20210901.11 DO - 10.11648/j.ogce.20210901.11 T2 - International Journal of Oil, Gas and Coal Engineering JF - International Journal of Oil, Gas and Coal Engineering JO - International Journal of Oil, Gas and Coal Engineering SP - 1 EP - 5 PB - Science Publishing Group SN - 2376-7677 UR - https://doi.org/10.11648/j.ogce.20210901.11 AB - In view of the use and existing problems of high water cut hydraulic fluid for hydraulic support in Shendong mining area, the water quality of each mine in Shendong mining area was analyzed. The influence of mine water quality on hydraulic fluid was analyzed, including the influence of water hardness, the influence of impurities in water, the influence of sulfate ions and chloride ions, the influence of pH value, the influence of conductivity, and the comparison of different raw liquids and different hydraulic fluids. The matters needing attention in daily use and maintenance of hydraulic fluids were put forward. The corresponding hydraulic fluid should be scientifically selected and reasonably proportioned according to the mine water quality. The real-time monitoring of the hydraulic fluid should be paid attention to. The changes in the water quality, concentration, pH value and microbial situation of the hydraulic fluid should be monitored daily. The maintenance and management of the problems should be carried out in time according to the situation, so as to prevent equipment corrosion and ensure the working stability of the hydraulic system. It can provide reference for the selection, proportioning and maintenance of the high water-cut hydraulic fluid of the mine hydraulic support and ensure the safe and efficient production of the working face. VL - 9 IS - 1 ER -